![]() This transformer is the distinguishing factor that makes it different from the other ribbon microphones and is why it does not need phantom power.Įven if phantom power is applied to the mic mistakenly, the transformer does its job to isolate the ribbon to prevent any damage or adverse impact on the mic. Apart from the pure-aluminum made ribbon and the rare earth magnetic assembly, the third component that provides some impedance matching and voltage step-up facility to the output unit is a miniature transformer. The model is pretty lightweight and is 243g and is around 6.13 inches long with a diameter of 1 inch (156 x 25mm). The motor has been meticulously designed to ensure the flux field remains where it is required, thereby minimizing any unwanted external fields that cause static or disturbance. It does use quite a lot of sophisticated materials that make it different from the conventional ribbon mic.īetween the poles of a robust magnetic assembly made up of a neodymium magnet, there resides a 2.5�m-thick ribbon made up of pure aluminum. ![]() Once we finish V+ Booster app for both iOS and Android, we will do research on the original P2V.The basic design of the R121 is pretty much similar to the traditional ribbon microphones. Is there a plan to develop a version for original Phantom 2 Vision? V+ Booster app works well alone, as well as any antenna mods on Vision+ aircraft and/or range extender. It's estimated shortening less than 10 seconds of flight time out of 25 minutes. It consumes VERY little extra power and generates NO extra heat per our testing. Does it consume more battery power to shorten flight time or generate extra heat to damage the circuit? V+ Booster app only boosts 2.4G Wi-Fi video connection (FPV) while the 5.8G control link remains the same. It may fly out of your 5.8G control range and trigger RTH. Fly back your Vision+ and run the V+ Booster app, then fly again the same flight path with the same Preview Quality for apple-to-apple comparison. ![]() You may search "fpv booster" in App Store, or click the link on your iDevice įor Android, you may search "fpv booster" in Google Play store, or click on your Android device įly your Vision+ WITHOUT turning on the booster (as a reference) to your favorite flight path until Wi-Fi video dropped. How can I find it in App Store or Google Play?įor iOS, V+ Booster app is classified as "iPhone Only". Running the app on other incompatible platforms (including original Phantom 2 Vision) may encounter unexpected results. V+ Booster is ONLY compatible with DJI Phantom 2 Vision+ (Plus). Does it compatible with original Phantom 2 Vision? Note: Every time when you power cycle Vision+ aircraft or range extender, you need to run V+ Booster app to take effect. It will display a message "Your Vision+ is boosted up". The app connects to Vision+ aircraft through the Wi-Fi network, then it boosts up Wi-Fi power and applies tweaks to the aircraft. Open V+ Booster app, tap “Boost up!” button. Turn on both Phantom 2 Vision+ aircraft and range extender, and connect your iOS/Android device to Wi-Fi network as usual. It boosts additional 50%-100% FPV range by a single click. Vision+ Wi-Fi Booster (V+ Booster) is an app that improves Wi-Fi video connection (FPV, First Personal View) performance for DJI Phantom 2 Vision+.
0 Comments
Leave a Reply. |